Combining Organometallic Reagents,the Sulfur Dioxide Surrogate DABSO,and Amines: A One‐Pot Preparation of Sulfonamides,Amenable to Array Synthesis

We describe a method for the synthesis of sulfonamides through the combination of an organometallic reagent, a sulfur dioxide equivalent, and an aqueous solution of an amine under oxidative conditions (bleach). This simple reaction protocol avoids the need to employ sulfonyl chloride substrates, thus removing the limitation imposed by the commercial availability of these reagents. The resultant method allows access to new chemical space, and is also tolerant of the polar functional groups needed to impart favorable physiochemical properties required for medicinal chemistry and agrochemistry. The developed chemistry is employed in the synthesis of a targeted 70 compound array, prepared using automated methods. The array achieved a 93 % success rate for compounds prepared. Calculated molecular weights, lipophilicities, and polar surface areas are presented, demonstrating the utility of the method for delivering sulfonamides with drug‐like properties.     

Stress memory polymers

Like shape memory polymers, a novel phenomenon of stress memory was shown in which the stress of a material can respond to an external stimulus. This concept was further enlightened by a switch‐spring‐frame model that would eliminate the limitation of existing models which overlooked the stimulus responsive nature of such polymers. The discovery being reported in this article was stemmed from a real case study into shape memory polymer fibers in compression stocking for varicose veins. The breakthrough of stress memory enabled researchers to develop applications needing stimuli‐responsive forces, which can broaden the horizon of such smart polymers in emerging smart products in many multidisciplinary fields such as sensors, stress garments, and massage devices, electronic skins, and artificial muscles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 893–898     

Visible‐Light‐Driven Halogen Bond Donor Based Molecular Switches: From Reversible Unwinding to Handedness Inversion in Self‐Organized Soft Helical Superstructures

Visible‐light‐driven molecular switches endowing reversible modulation of the functionalities of self‐organized soft materials are currently highly sought after for fundamental scientific studies and technological applications. Reported herein are the design and synthesis of two novel halogen bond donor based chiral molecular switches that exhibit reversible photoisomerization upon exposure to visible light of different wavelengths. These chiral molecular switches induce photoresponsive helical superstructures, that is, cholesteric liquid crystals, when doped into the commercially available room‐temperature achiral liquid crystal host 5CB, which also acts as a halogen‐bond acceptor. The induced helical superstructure containing the molecular switch with terminal iodo atoms exhibits visible‐light‐driven reversible unwinding, that is, a cholesteric–nematic phase transition. Interestingly, the molecular switch with terminal bromo atoms confers reversible handedness inversion to the helical superstructure upon irradiation with visible light of different wavelengths. This visible‐light‐driven, reversible handedness inversion, enabled by a halogen bond donor molecular switch, is unprecedented.     

FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

Fano profile in a novel double cavity optomechanical system with harmonically bound mirrors

We investigate a double cavity optomechanical system generating single and double Fano resonance (multi-Fano). By altering a single parameter, the tunnelling rate g of the middle mirror, we are able to switch between single and double Fano line shapes. The first spectral line shape is stronger in the case of multi-Fano than in the case of single Fano. Also the behaviour of the steady state value of the displacement of the middle mirror, with respect to g, heavily influences the behaviour of double Fano lines in our scheme. This tunability along with using a single pump and signal/probe laser has an added advantage in situations where only low power consumption is available.     

A three-dimensional frequency selective structure based on the modes coupling of spoof surface plasmon and waveguide transmission

A three-dimensional frequency selective structure (3D FSS) was proposed by applying the spoof surface plasmon (SSP) structures into periodic waveguides, which realizes an enhanced broadband transmission in low frequencies, below the cut-off frequency of periodic waveguides. The transmission characteristics of SSP structures and periodic waveguides as well as their coupling modes are investigated by simulation and experiment method. According to our analysis, the pass-band of this 3D FSS can be customized through changing the values of structure parameters and it also has a good angular stability. In addition, this paper also provides a simple assembly plan for sample preparation. This proposal may be useful for improving filtering performances and gives an effective approach for designing 3D FSSs.     

曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.     

用于SCA ASIC测试的数字读出模块设计

高速开关电容阵列(SCA)具有高速采样、低功耗的特点,基于SCA的高速波形数字化是目前高精度时间测量的一个重要研究方向。为此,我们开展SCA芯片的研究,目前已设计完成原型ASIC设计,并正在进行后续版本的改进设计。为便于未来多版本ASIC的测试和评估,需设计具有一定通用性的数字读出模块,本论文工作主要介绍此模块的设计工作以及相应的数据读出软件。数字读出模块基于FPGA实现对待测ASIC的控制、配置及数据读出,采用DDR3片外存储芯片,使用USB3.0等接口进行数据传输;上位机软件基于Python3.7设计,实现了数据采集与波形绘制等功能。目前已使用设计完成的数字读出模块对第2版SCA ASIC进行了初步的测试,测试结果表明,此读出模块工作正常,且SCA芯片输出结果符合预期。     

Broadband mode converter and multiplexer based on dielectric-loaded plasmonic waveguides

We theoretically demonstrate a broadband mode converter and multiplexer based on plasmonic waveguides loaded with structured dielectrics. The proposed device can realize conversions between a fundamental TM₀ mode and a first order TM₁ mode, as well as (de)multiplex them with another TM₀ mode. Our design exhibits as wide as 400 nm bandwidth and as short as 6~7 μm coupling length. This work has potential application in high density photonic integrated devices for both computing and communication applications.